Picocrush laboratory hammer mill
Reliable pre-comminution lays the foundation for successful downstream processes. The Picocrush laboratory hammer mill processes larger granules and agglomerates efficiently and in a controlled manner, thereby ensuring optimal conditions for development, testing and production. Seamlessly integrated into the Picoline platform, it expands the range of applications to include additional process options.
Your benefits at a glance
- Mechanical hammer mill for dry (pre-)comminution of larger granulates and agglomerates of soft to medium-hard materials
- Hammer mechanism with freely movable blow bars
- Grinding tool combined with grinding track and different sieve sizes for easy replacement
- Engine bearing gas flushed
- Tubeless purge air supply
- Continuous operation
- Stainless steel design
- Designs: Sieve inserts with different opening diameters, with suction to support the product feed
- The design and mode of operation largely correspond to the Ha hammer mill from Hosokawa Alpine
Technical specifications
|
Separation range |
1 - 3 mm |
|---|---|
|
Grinding to Mohs hardness |
4 |
|
Rotor diameter |
40 mm |
|
Speed |
max. 30,000 rpm |
- The ground material is dosed into the centre of two counter-rotating pin discs and crushed by impact against the grinding pins.
- The high shear rate of the counter-rotating discs enables particularly intensive stressing of the particles.
- After passing through the grinding zone, the ground material enters the mill housing and exits the mill by gravity.
- The rotation creates an air flow from which the ground material is separated in a filter.
- The grinder is adjusted by the speed of the two rotors and the feed rate.
1 Counter-rotating pin discs 2 Pin disc drive
