Solids Basic Design
Das solids Basic Design kommt zur Anwendung bei trockenen Prozessen mit nicht korrosiven Schüttgütern geringer bis mittlerer Härte für eine geringe bis mittlere Belastung bei niedrigen bis mittleren Temperaturen in nicht aggressiver Industrieatmosphäre unter Beachtung der Maschinenrichtlinie ohne Anhang 1 Abs. 2.1. Nahrungsmittelmaschinen.
- Design in principle in carbon steel, casting parts in grey cast iron/cast steel, machine parts partly in optional stainless steel
- Surface casting sandblasted on the outside Ra = approx. 12.5 µm, permissible casting defects according to quality class VC3 to DIN EN 1370
- Dimensioning and design according to relevant standards and guidelines
- Wall thicknesses and welds according to strength requirements
- Interrupted weld seams are permissible
- Welds in principle according to EN ISO 5817 quality level C
- Pressure proof or pressure shock resistant components with the required verifications
- Support constructions where necessary with static calculations
- Support constructions in carbon steel, painted
- Surfaces chemically degreased, descaled, primed and painted
- Optionally sandblasted, degree of purity SA 2.5 according to DIN EN ISO 8501-1
