As a leading supplier of technology with 700 employees at our headquarters in Augsburg and in Leingarten, we develop, engineer and install machines and systems for process technology and film extrusion for our customers all over the world.
Proven since over 110 years: our mills, classifiers, compactors and turnkey systems for the production of fine powders and granules, for mineral base materials, in the chemicals / pharmaceuticals industries, for foodstuffs and for recycling tasks.
We are a leading international manufacturer of complete Blown Film Extrusion Equipment ranging from single extruder mono-lines to 11-layer high barrier film lines. Alpine’s X-Die is considered the “Gold Standard” in the Blown Film Industry.
With their knowledge, experience and engagement, our employees are the most important success factors for our company and the quality of our products. We offer a wide range of activities and career opportunities.
Hosokawa Alpine film orientation lines (MDO) + TRIO make more from your film.
Hosokawa Alpine is the market leader in mono-axial film orientation lines (MDO - Machine Direction Orientation). During the orientation process, a blown film is stretched between two rollers which run at different speeds.
Advantages of Hosokawa Alpine film orientation technology
By means of mono-axial orientation the film properties can be optimized to meet the specific requirements of your application:
Elongation in the machine direction
Dead fold properties
Water vapour permeability
Orient film more economically: using the patented TRIO system (EP 2277681)
During the orientation process, the film necks-in in the transverse direction and consequently reduces in width. This neck-in results in a thickness profile in the transverse direction which is biconcave, the oriented film becomes increasingly thick from the center of the film towards the film edges. In order to achieve sufficient film flatness and thickness distribution to enable the film to be processed on downstream equipment wide edge trims were required.
In order to overcome these disadvantages of orientation technology, Hosokawa Alpine has developed the patented TRIO system (Trim Reduction for Inline Orientation). Through the use of TRIO, the edge trim is markedly reduced, material is saved and the net output is increased. The efficiency of the entire process is enhanced. In comparison to MDO systems without TRIO the edge trim is reduced by approximately 50% with significantly improved film flatness.
Examples of oriented film applications you will find here